Suitable applications
Enclosures, cabinets, doors, shelves and cladding. Mechanical clamping may suit parts where vacuum gripping is difficult; suitability is assessed against the flat pattern, holes and clamping area.
press-arm panel bender PB-P
The image is for reference. Actual appearance and configuration may vary.
- Bending length, mm
- 1400 / 2000 / 2500
- Bend height, mm
- 170
- Control
- CNC
PB1400P, PB2000P, PB2500P
A clamping manipulator feeds and rotates the sheet during programmed bending. For repeatable production of panels and enclosures with several flanges.
Servo-electric drives control tooling and feeding. The press-arm assembly holds the blank during movement and rotation. A coordinated program enables positive and negative bends without manually transferring the part between every operation.
Purpose and distinguishing features
PB-P press-arm panel bender
PB-P uses a clamping manipulator rather than vacuum gripping. Check where the panel is clamped and whether formed flanges obstruct the next rotation. Minimum blank size, cutout geometry and accessible clamping areas are important selection inputs.
Technical specifications
| Model | Bending length, mm | Bend height, mm | Minimum sheet thickness, mm | Stainless steel, mm | Cold-rolled steel, mm | Total installed power, kW | Rated voltage, V | Machine weight, t | Dimensions L × W × H, mm |
|---|---|---|---|---|---|---|---|---|---|
| PB1400P | 1400 | 170 | 0.35 | 1.2 | 1.5 | 38 | 380 | ~12 | 4400 × 1900 × 2900 |
| PB2000P | 2000 | 170 | 0.35 | 1.2 | 1.5 | 77 | 380 | ~16 | 5100 × 2650 × 3300 |
| PB2500P | 2500 | 170 | 0.35 | 1.2 | 1.5 | 77 | 380 | ~19 | 5650 × 3000 × 3400 |
Choosing a configuration
PB1400P, PB2000P and PB2500P have separate formats, installed powers and dimensions. Thicknesses apply to 304 stainless steel at 515 N/mm² and cold-rolled steel at 410 N/mm². Flange height alone does not establish whether a closed box is feasible: the full path must be checked.
Clamping, tooling, rotation, feeding, programming and automated loading. Cycle assessment needs drawings, materials, thicknesses and batch sizes. Axis count and controller capabilities are fixed in the agreed configuration, not transferred between versions.
Discuss configuration
Send a drawing or photograph of the part, material, thickness, blank size and required output. This lets us compare configurations against your job, not just their power rating.
Tell us what you would like to clarify. Add drawings, photos or the required configuration reference to your request if available.
Discuss configurationAlso in the catalogue
PB1000S, PB1400S
Vacuum-feed panel bender
Servo-electric panel bending with suction-cup handling. For enclosures and boxes that require several sides of one blank to be formed in sequence.
- Bending length, mm
- 1000 / 1400
- Bend height, mm
- 170
- Control
- CNC
A16, A21, A26
Panel bender with automatic tool change
Automated tooling setup for different panel parts. For production that changes formats, flange heights and bending programs.
- Bending length, mm
- 1630 / 2190 / 2610
- Bend height, mm
- 180
- Control
- CNC
LF3015CN
Open-bed sheet laser
A single open 3000 × 1500 mm table with direct sheet access. A model for straightforward stock logistics and a configuration matched to the actual job.
- Source power, kW
- 1 / 2 / 3 / 4 / 6
- Working area, mm
- 3000 × 1500
- Layout
- Open bed