Suitable applications
Enclosures, panels, doors and parts with several consecutive bends. Automatic tool change helps with repeated setups, but suitability depends on your actual part range, not just the number of programs.
panel bender with automatic tool change PB-A
The image is for reference. Actual appearance and configuration may vary.
- Bending length, mm
- 1630 / 2190 / 2610
- Bend height, mm
- 180
- Control
- CNC
A16, A21, A26
Automated tooling setup for different panel parts. For production that changes formats, flange heights and bending programs.
Press-arm feeding works with servo drives and automatic tool change. The table may use brushes and ball-transfer supports. Robotic loading, additional tools and production-system integration are separately agreed options.
Purpose and distinguishing features
PB-A panel bender with automatic tool change
PB-A distinguishes itself through automated tooling setup for the panel. Its value depends particularly on product-change frequency. Compare bending and between-batch setup time; verify unusual flanges, hems and gripping limitations from drawings.
Technical specifications
| Model | Bending length, mm | Bend height, mm | Minimum bend height, mm | Minimum radius, mm | Maximum diagonal, mm | Stainless steel, mm | Cold-rolled steel, mm | Aluminium, mm | Total installed power, kW | Peak power, kW | Machine weight, t |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A16 | 1630 | 180 | 4 | 4 | 2300 | 1.5 | 2 | 3.5 | 44 | 26 | 10 |
| A21 | 2190 | 180 | 6 | 4 | 2850 | 1.5 | 2 | 3.5 | 89 | 50 | 19 |
| A26 | 2610 | 180 | 6 | 4 | 3200 | 1.5 | 2 | 3.5 | 118 | 76 | 24 |
Choosing a configuration
The table lists A16, A21 and A26. The factory's series photograph carries PB2500PC markings and does not establish the appearance of every listed variant. We agree the model, tools, material, geometry and actual cycle using drawings or sample parts before ordering.
Working length, bend height and radius, tooling, loading, stacking and programming. Tabulated thicknesses depend on material properties. Installed and peak power are listed separately and do not represent average consumption over a shift.
Discuss configuration
Send a drawing or photograph of the part, material, thickness, blank size and required output. This lets us compare configurations against your job, not just their power rating.
Tell us what you would like to clarify. Add drawings, photos or the required configuration reference to your request if available.
Discuss configurationAlso in the catalogue
PB1000S, PB1400S
Vacuum-feed panel bender
Servo-electric panel bending with suction-cup handling. For enclosures and boxes that require several sides of one blank to be formed in sequence.
- Bending length, mm
- 1000 / 1400
- Bend height, mm
- 170
- Control
- CNC
PB1400P, PB2000P, PB2500P
Press-arm panel bender
A clamping manipulator feeds and rotates the sheet during programmed bending. For repeatable production of panels and enclosures with several flanges.
- Bending length, mm
- 1400 / 2000 / 2500
- Bend height, mm
- 170
- Control
- CNC
LF3015CN
Open-bed sheet laser
A single open 3000 × 1500 mm table with direct sheet access. A model for straightforward stock logistics and a configuration matched to the actual job.
- Source power, kW
- 1 / 2 / 3 / 4 / 6
- Working area, mm
- 3000 × 1500
- Layout
- Open bed