Suitable applications
Frames, supports, profile assemblies and parts with repeated holes. Compatibility with channels, angles or complex sections is checked against clamping and head access.
two-chuck tube laser MK-T2W
The image is for reference. Actual appearance and configuration may vary.
- Chuck count
- 2
- Control
- CNC
- Layout
- Following supports
A dedicated tube laser with following supports and an unloading area. For workshops where tube parts form a separate production stream.
Following supports adjust their height during machining to support the blank. Two chucks control tube position and rotation; the receiving section helps organize finished-part removal.
Purpose and distinguishing features
MK-T2W two-chuck tube laser
MK-T2W uses following supports while the tube moves, important for long stock prone to deflection and oscillation. Without a confirmed numerical table, selection follows drawings and section data; diameters, loads and power are not borrowed from MK-T3W.
Technical specifications
| Model | Source power, kW | Round tube, mm | Square tube, mm |
|---|---|---|---|
| MK-T2W | — | — | — |
| Chuck count | 2 |
|---|
Choosing a configuration
Selection begins with tube section, length and mass. Exact numeric limits are confirmed in the specification: the public series page lacks a full table. Specifications from other tube lasers are not transferred.
We agree bed length, chucks, supports, source and loading. Selection also requires the permitted remnant, unloading method and edge-quality requirements.
Discuss configuration
Send a drawing or photograph of the part, material, thickness, blank size and required output. This lets us compare configurations against your job, not just their power rating.
Tell us what you would like to clarify. Add drawings, photos or the required configuration reference to your request if available.
Discuss configurationAlso in the catalogue
GKS-6024T2, GKS-6036T2
Two-chuck tube laser
Round and square tube cutting with two-chuck workholding. Two configurations cover different stock sizes and workpiece weights.
- Source power, kW
- 3 / 4 / 6
- Round tube, mm
- 20–350
- Effective cutting length, mm
- 6500
12050T3, 12065T3, 36T3
Three-chuck tube laser
Three travelling chucks for long and heavy tubes. The range covers different sections and loads, from the 36T3 configuration to 12065T3 for workpieces weighing up to 3000 kg.
- Source power, kW
- 3–30
- Round tube, mm
- 30–600
- Workpiece mass, kg
- 1200–3000
12050T4
Heavy-duty four-chuck tube laser
A system for round tube up to 500 mm, square section up to 350 × 350 mm and workpieces up to 2000 kg. Four travelling chucks support long profiles at different processing stages.
- Source power, kW
- 6–20
- Round tube, mm
- 50–500
- Workpiece mass, kg
- 2000