Suitable applications
Tube frames, profile blanks and structural assemblies. Compare stock size, feeding access, finished-part length and available support when selecting the layout.
side-mounted tube laser MK-T2C
The image is for reference. Actual appearance and configuration may vary.
- Chuck count
- 2
- Control
- CNC
- Layout
- Side-mounted bed
A two-chuck side-mounted layout for tubes and profiles. Loading and workpiece access run along the machine bed.
The chucks sit beside the structural beam, with support assemblies below the tube. This provides different material access from horizontal models and is evaluated alongside workshop logistics.
Purpose and distinguishing features
MK-T2C side-mounted tube laser
MK-T2C is a two-chuck side-mounted arrangement with access along the bed. A similar identifier on a compact economic model does not establish this heavy family's specifications. Verify the exact version, supports and loading before defining allowable profiles and tube weight.
Technical specifications
| Model | Source power, kW | Round tube, mm | Square tube, mm |
|---|---|---|---|
| MK-T2C | — | — | — |
| Chuck count | 2 |
|---|
Choosing a configuration
The factory confirms MK-T2C as a separate series but provides no full numeric table on the category page. Power, section, length and payload are confirmed for the chosen configuration, not borrowed from T3C.
Prepare drawings, tube sections and mass. We agree clamping, source, supports, loading and unloading, working aisles and protection of the laser area.
Discuss configuration
Send a drawing or photograph of the part, material, thickness, blank size and required output. This lets us compare configurations against your job, not just their power rating.
Tell us what you would like to clarify. Add drawings, photos or the required configuration reference to your request if available.
Discuss configurationAlso in the catalogue
GKS-6024T2, GKS-6036T2
Two-chuck tube laser
Round and square tube cutting with two-chuck workholding. Two configurations cover different stock sizes and workpiece weights.
- Source power, kW
- 3 / 4 / 6
- Round tube, mm
- 20–350
- Effective cutting length, mm
- 6500
12050T3, 12065T3, 36T3
Three-chuck tube laser
Three travelling chucks for long and heavy tubes. The range covers different sections and loads, from the 36T3 configuration to 12065T3 for workpieces weighing up to 3000 kg.
- Source power, kW
- 3–30
- Round tube, mm
- 30–600
- Workpiece mass, kg
- 1200–3000
12050T4
Heavy-duty four-chuck tube laser
A system for round tube up to 500 mm, square section up to 350 × 350 mm and workpieces up to 2000 kg. Four travelling chucks support long profiles at different processing stages.
- Source power, kW
- 6–20
- Round tube, mm
- 50–500
- Workpiece mass, kg
- 2000