The image is for reference. Actual appearance and configuration may vary.
Spatial processing of profiles and plate in one installation. Contours, holes and bevels prepared for subsequent structural assembly.
A gantry moves the five-axis head over the workpiece. Adjustable supports accommodate profiles of different widths; programming can use structural 3D-model data. File-format and postprocessor compatibility are checked before commissioning.
Beams and components for building structures, machinery, bridge assemblies and frames. The system suits routes combining contours, holes and edge preparation. Bevel geometry and accessibility are checked against the part's 3D model.
GKS-12015S processes spatial profiles rather than only flat sheet nests. Beam work depends on flange and web access, hole orientation and edge preparation for assembly. Axis travels should not be interpreted as the allowable dimensions of any workpiece.
| Model | Source power, kW | X-axis travel, mm | Y-axis travel, mm | Z-axis travel, mm |
|---|---|---|---|---|
| GKS-12015S | 12 / 20 / 30 | 3500 | 28000 | 1050 |
| Positioning accuracy, mm/m | ±0.25 |
|---|---|
| Positioning repeatability, mm | ±0.05 |
| Maximum acceleration, g | 0.5 |
| Power supply, V / Hz | 380 / 50 |
X/Y/Z travels of 3500/28000/1050 mm describe the axes, not a guaranteed profile size. Allowed section, length, weight and access to each face depend on supports and head trajectory. Positioning accuracy of ±0.25 mm/m is not the tolerance of a completed welded assembly.
A 12, 20 or 30 kW source, supports, programming, slag removal, extraction and crane loading. Provide profile drawings, steel grades, wall thicknesses, batches and workshop layout. Dual-zone arrangement, protection and actual cycle are agreed for the job.
Send a drawing or photograph of the part, material, thickness, blank size and required output. This lets us compare configurations against your job, not just their power rating.
Tell us what you would like to clarify. Add drawings, photos or the required configuration reference to your request if available.
Discuss configuration
LF1800
Spatial laser processing of formed parts. A robot follows contours that are difficult to access with a conventional flat-bed machine.
GKS-M3015G, GKS-M3122G, GKS-M4025G
Spatial contour cutting with two rotary head axes. For formed parts requiring access from several directions.
MK-HX
Cut-to-length, holes, cutouts and bevels on I-beams, channels and angles. Five controlled axes allow machining on different profile faces.
