Suitable applications
Lift cabins, cladding, decorative boxes and architectural panels. Grooving helps achieve the intended bend appearance but reduces the material section; strength and suitability require separate assessment.
vertical V-grooving machine ADRK
The image is for reference. Actual appearance and configuration may vary.
- Processing length, mm
- 3200 / 4000
- Processing width, mm
- 1250 / 1500
- Sheet thickness for grooving, mm
- 0.4–6
ADRK 3200/1250, ADRK 3200/1500, ADRK 4000/1250, ADRK 4000/1500
V-shaped grooves before forming sheet parts with a defined outer corner. A family with front/rear sheet supports and controlled tool movement.
A rigid frame, clamps, tool head and sheet supports form the work area. Cutters remove material according to the program. Controls define groove positions and passes; a separate bending operation is still required.
Purpose and distinguishing features
ADRK vertical V-grooving machine
ADRK offers a different V-grooving arrangement with front and rear sheet supports. Compare it with gantry-type ADHK by format, access and blank support. For cladding parts, check decorative-surface orientation, clamping and groove positions relative to the planned bends.
Technical specifications
| Model | Processing width, mm | Processing length, mm | Sheet thickness for grooving, mm | Minimum sheet thickness, mm | Groove edge distance, mm | Tool cutting speed, m/min | Main motor, kW | Hydraulic pressure, MPa | Dimensions L × W × H, mm |
|---|---|---|---|---|---|---|---|---|---|
| ADRK 3200/1250 | 1250 | 3200 | 6 | 0.4 | 8 | 0-90 | 4.5 | 6-8 | 4800 × 2650 × 2100 |
| ADRK 3200/1500 | 1500 | 3200 | 6 | 0.4 | 8 | 0-90 | 4.5 | 6-8 | 4800 × 2850 × 2100 |
| ADRK 4000/1250 | 1250 | 4000 | 6 | 0.4 | 8 | 0-90 | 4.5 | 6-8 | 5850 × 2650 × 2100 |
| ADRK 4000/1500 | 1500 | 4000 | 6 | 0.4 | 8 | 0-90 | 4.5 | 6-8 | 5850 × 2850 × 2100 |
| Positioning accuracy, mm | ±0.01 |
|---|
Choosing a configuration
Four formats and sheet thickness up to 6 mm are listed, subject to the factory condition of stainless-sheet flatness deviation below 3 mm. This is not groove depth. The factory ADRK page photograph carries an ADHK code; exact markings and appearance are confirmed before ordering.
Format, tooling, residual thickness, clamps and supports. Send drawings, material grade, thickness and a photograph of the required edge. Speed and accuracy are assessed for the specified path and surface, not automatically applied to the finished product.
Discuss configuration
Send a drawing or photograph of the part, material, thickness, blank size and required output. This lets us compare configurations against your job, not just their power rating.
Tell us what you would like to clarify. Add drawings, photos or the required configuration reference to your request if available.
Discuss configurationAlso in the catalogue
ADHK 3200/1250, ADHK 4000/1250, ADHK 4000/1500, ADHK 5000/1250, ADHK 5000/1500, ADHK 6000/1250, ADHK 6000/1500
Gantry V-grooving machine
V-shaped grooves in sheet before decorative bending. A gantry layout provides access across a large flat blank.
- Processing length, mm
- 3200–6000
- Processing width, mm
- 1250 / 1500
- Sheet thickness for grooving, mm
- 0.4–4
LF3015CN
Open-bed sheet laser
A single open 3000 × 1500 mm table with direct sheet access. A model for straightforward stock logistics and a configuration matched to the actual job.
- Source power, kW
- 1 / 2 / 3 / 4 / 6
- Working area, mm
- 3000 × 1500
- Layout
- Open bed
LF3015LN, LF4020LN, LF6025LN
Open-bed sheet laser
An open-access working area in several standard formats. A sheet cutting series configured for your application.
- Source power, kW
- 1–12
- Formats, mm
- 3050 × 1520 — 6100 × 2550
- Layout
- Open bed