The image is for reference. Actual appearance and configuration may vary.
A modular open system for long sheets and large flat parts. Working-area length and width are specified around the production task.
Ground rails and sheet supports are separate. The modular design extends the long cutting area; the factory describes a 12 m arrangement with additional sections. Foundation, guides, temperature conditions, crane loading and machine-side aisles all need consideration.
Long structural members, heavy panels and machinery blanks. A large bed accommodates a whole part where splitting it is undesirable. For shorter parts and frequent job changes, loading and material flow should be compared separately.
MK-H combines a modular bed with a separate working table to configure a long open cutting area. This supports large sheets and maintenance access. Agree bed sections, crane logistics and the protected zone; modular construction does not replace an installation plan.
| Model | Source power, kW | Working area, mm |
|---|---|---|
| MK-H | ≤80 | — |
First establish maximum part dimensions, sheet mass and handling method. The series offer includes sources up to 80 kW, but usable thickness and bevel quality depend on source, head, material and settings. Exact working dimensions are not calculated from a promotional model name.
Bed sections, width, source, bevel head, extraction and area protection are specified individually. Light curtains and emergency stops do not remove laser-safety requirements. Agree the workshop arrangement and test your materials before ordering.
Send a drawing or photograph of the part, material, thickness, blank size and required output. This lets us compare configurations against your job, not just their power rating.
Tell us what you would like to clarify. Add drawings, photos or the required configuration reference to your request if available.
Discuss configuration
LF3015CN
A single open 3000 × 1500 mm table with direct sheet access. A model for straightforward stock logistics and a configuration matched to the actual job.
LF3015LN, LF4020LN, LF6025LN
An open-access working area in several standard formats. A sheet cutting series configured for your application.
LF3015GA, LF4020GA, LF6025GA
A protective enclosure and exchange tables for organised sheet processing. While the machine cuts on one table, the other can be prepared for the next cycle.
