Suitable applications
Small metal products, enclosures and auxiliary welding. Suitability depends on material, joint, gap and weld requirements, not just the unit's compact size.
air-cooled laser welding MK-AW
The image is for reference. Actual appearance and configuration may vary.
- Cooling
- Air-cooled
- Configuration
- Mobile system
- Model
- MK-AW
A compact mobile system for handheld laser welding. Air cooling simplifies the arrangement without a separate water chiller.
Source, controls and cooling are housed in the cabinet. The factory describes welding, cleaning, cutting and weld-cleaning modes; equipment and available modes are agreed for the actual supply.
Purpose and distinguishing features
MK-AW air-cooled laser welding
MK-AW differs from water-cooled MK-HW in cooling and mobile-workstation arrangement. The absence of a separate water chiller does not establish an equivalent continuous duty cycle. Check the required seam, shift workload and air-cooling conditions of the actual version.
Technical specifications
| Model | Source power, kW |
|---|---|
| MK-AW | — |
Choosing a configuration
Power, duty duration, electrical supply and ambient-temperature limits are confirmed in the specification. Image markings do not replace a numeric table. Air cooling does not imply unlimited continuous operation.
We check trial joints, wire feeding, gas, extraction and protected work area. This series does not replace our prepared MK-HW 2/3 kW configuration; they are compared as different solutions.
Discuss configuration
Send a drawing or photograph of the part, material, thickness, blank size and required output. This lets us compare configurations against your job, not just their power rating.
Tell us what you would like to clarify. Add drawings, photos or the required configuration reference to your request if available.
Discuss configurationAlso in the catalogue
MK-HW2000, MK-HW3000
Handheld laser welder
A compact water-cooled welding system with a handheld head. Configuration is selected for the material, joint and workplace conditions.
- Source power, kW
- 2 / 3
- Fiber, m
- 10
- Cooling
- Water-cooled
MR-AW-FL1500W
Five-axis automatic laser welder
An automatic system for flanges and repeat parts with X/Y/Z linear axes and two rotary axes, W1 and W2.
- Source power, kW
- 1.5
- Controlled axes
- 5
- X / Y / Z travel, mm
- 1000 × 1250 × 500
LF3015CN
Open-bed sheet laser
A single open 3000 × 1500 mm table with direct sheet access. A model for straightforward stock logistics and a configuration matched to the actual job.
- Source power, kW
- 1 / 2 / 3 / 4 / 6
- Working area, mm
- 3000 × 1500
- Layout
- Open bed