Suitable applications
Instrument components, small panels, brackets and thin-sheet parts. The format is useful where material already arrives cut to size. For small parts, blank support, removal and nesting matter alongside source power.
Small-part laser LF0660
The image is for reference. Actual appearance and configuration may vary.
- Working area, mm
- 600 × 600
- Source power, kW
- 0.5–3
- Positioning repeatability, mm
- ±0.02
An enclosed fiber system with a 600 × 600 mm working area. A compact format for small blanks, development parts and batches that do not require a full-size sheet table.
The machine combines an enclosed body, controlled drives and an autofocus cutting head. Dual guides and a Y-axis screw drive support stable motion. The stated 1835 × 2250 × 1630 mm dimensions describe the machine itself, not access aisles or the complete auxiliary-system footprint.
Purpose and distinguishing features
Small-part laser LF0660
LF0660 targets parts that do not require a large bed. Small blanks need suitable location, support and retention of cut pieces. A compact working area alone does not guarantee finished-part tolerance; verify it against contour geometry and thermal effects.
Technical specifications
| Model | Working area, mm | Source power, kW |
|---|---|---|
| LF0660 | 600 × 600 | 0.5 / 0.8 / 1 / 2 / 3 |
| Positioning repeatability, mm | ±0.02 |
|---|---|
| Maximum travel speed, m/min | 40 |
| Maximum acceleration, g | 0.5 |
| Dimensions L × W × H, mm | 1835 × 2250 × 1630 |
Choosing a configuration
Compare LF0660 with the larger LF1390 by incoming blank size, parts per cycle and loading frequency. A smaller working area does not automatically mean greater accuracy. Positioning repeatability and finished-part performance are checked separately for the material and cutting process.
A 0.5–3 kW source from available variants, head, cooling, extraction and assist gas. Send drawings, thicknesses, tolerances and required output. Electrical connection and work-area protection are agreed for the selected configuration before delivery.
Discuss configuration
Send a drawing or photograph of the part, material, thickness, blank size and required output. This lets us compare configurations against your job, not just their power rating.
Tell us what you would like to clarify. Add drawings, photos or the required configuration reference to your request if available.
Discuss configurationAlso in the catalogue
LF3015CN
Open-bed sheet laser
A single open 3000 × 1500 mm table with direct sheet access. A model for straightforward stock logistics and a configuration matched to the actual job.
- Source power, kW
- 1 / 2 / 3 / 4 / 6
- Working area, mm
- 3000 × 1500
- Layout
- Open bed
LF3015LN, LF4020LN, LF6025LN
Open-bed sheet laser
An open-access working area in several standard formats. A sheet cutting series configured for your application.
- Source power, kW
- 1–12
- Formats, mm
- 3050 × 1520 — 6100 × 2550
- Layout
- Open bed
LF3015GA, LF4020GA, LF6025GA
Enclosed laser with exchange tables
A protective enclosure and exchange tables for organised sheet processing. While the machine cuts on one table, the other can be prepared for the next cycle.
- Source power, kW
- 1.5–12
- Formats, mm
- 3050 × 1530 — 6050 × 2530
- Layout
- Enclosed, exchange tables